This is the most updated Clockwork Recovery(CWR) for the Nook Color. This file is installed to your SD card to allow you to boot from the SD card into the CWR environment. From there you will install different roms such as Cyanogenmod 7. special thanks goes out to eyeballer and DizzyDen @ XDA Developers for creating the bootables and referencing my page here.
Clockwork Recovery v3.2.0.8
Download the respective size. If you have larger than a 16gb, choose the next lowest size.
xxgb_clockwork-3.0.2.8.rar
1 GB
2GB
4GB
8GB
16GB
How to create a bootable CWR SD card:
Note: in the video i reference an eyeballer version of the image. Use the versions above. They work just the same.
Requirements:
- Nook Color
- atleast 1GB micro SD card
- xxgb_clockwork-3.0.2.8.rar listed above
- Win32 Disk Imager
- USB SD card reader(a must have, you cannot use the nook for writing to the SD card during this process
Instructions
- Download all of the above files and put them in a convenient location. Extract Win32DiskImager and xxgb_clockwork-3.0.2.8.rar. Use an archive program such as WINRAR to extract the files.
- Open Win32Disk Imager and click the …. to select the xxgb_clockwork-3.0.2.8.img file
- Change the drive letter to your microSD card and click write.WARNING: This erases everything on your SD card.
- If you see a warning message click yes.
- The process to write the image should take no more than 5 minutes.
- Once it is complete, remove your SD card and insert it into your Nook Color that should be powered off first.
- Once inserted, turn the Nook Color on.
- Wait for it to load and you are now in the CWR environment.
- Use the volume keys to navigate, home to select, and power for back.
Use the HP format tool to return your SD card to original size.
Now what?
Email
LinkedIn
Facebook
Twitter
Care to share in depth what is the purpose and use of Updated Clockwork Recovery Bootable SD?
As i am new to this..
Best Regards,
CK
Every different rom you installed it would require a different version of CWR that you would download and flash to your sd card. This version is updated to support all roms and advanced ext 3/4 partitions. It is a universal bootable CWR.
[...] 1.1hz file and the addons file to your SD card. 3. Boot into CWR(either with a bootable SD card here or from installing CWR from ROM Manager, if using ROM Manager, do not install the OLD version) 4. [...]
acne
Acne is a skin condition caused by the sebaceous glands that are found mainly in the face, back and chest.
Hope you got the new 4Gb image… the original one I did had an error and still booted the older CWR… the one in my RS folder is updated.
whats your RS folder?
[...] Download the bootable clockwork image from this post. 2. Use win32diskimager to write the .img file to your SD card. YOU MUST USE AN SD [...]
[...] Nook Color atleast 1GB micro SD card CWM( Select the size of your SD card) CM7.1 beta 3.1 Win32 Disk Imager USB SD card reader(a must have, you cannot use the nook for [...]
[...] the files from this page and see if they work better: Nook Color: Updated Clockwork Recovery Bootable SD Maurice Mongeon I could see where 3.0.0.5 could be an issue. You should still be able to use my directions (use [...]
Hey guys..,i been crossing the line wanting to improve my nook color,but its been difficult cause,im new in the line of softwRe developing but i like it, almost all the terms the developer is using is unfamiliar to me” if someone can much ximplify the procedure, it will be cool thnks”
Jmt”
[...] Nook Color atleast 1GB micro SD card Bootable Clockwork (download your respective size SD Card) Honeycomb Hybrid RC1 v2 SD Card Mount Fix Win32 Disk [...]
[...] Color(stock firmware v1.2) atleast 1GB micro SD card Bootable Clockwork Recovery Image(select your respective SD card size and download) Win32 Disk Imager ManualNooter 4.5.18 USB SD card [...]
I tried this on a 2GB card. When I went to the “format data” part of the instructions, I got an error. I then proceeded to install the restore 1.1 file, but I continue to get to the screen with the “n” sign with “Mobile Reader Technology by Adobe” screen, and it hangs. Any help or suggestions?
that is probably an error due to not formatting. try the updated version for alot of bug fixes http://bit.ly/mH1Wmo
Hey, can you make a 512mb image? I looked everywhere online and couldn’t find one. Thanks.
[...] Thanked 185 Times in 143 Posts Try one of the other files from here Nook Color: Updated Clockwork Recovery Bootable SD*|*Maurice Mongeon. You can pick any of them that are smaller than the size of your SD card but not larger (so 128MB [...]
I tried to copy the 16 GB image on to my Sandisk 16GB disk and it could not. Insufficient space error. Now i will have to use the 8 GB image
[...] Thanked 221 Times in 172 Posts You can the slightly older version here Nook Color: Updated Clockwork Recovery Bootable SD*|*Maurice Mongeon. Remeber you can always burn an image for a size smaller or equal to your SD card size but never [...]
[...] Here is the link to Maurice Mongeon’s website. He gives credit to cmstlist @ XDA Developers. [mrm3.net] [...]
[...] of failure. I recommend any cheap 2 GB one. Dependent on your sd size, download the correct image here Use the 1st set of links, not the 1gb image at the bottom. Download that and then follow these [...]
[...] of failure. I recommend any cheap 2 GB one. Dependent on your sd size, download the correct image here Use the 1st set of links, not the 1gb image at the bottom. Download that and then follow these [...]
OK. Foolish me used the above instructions before remembering to update the NC to 1.2. Now when it starts it gets stuck at the “n” screen. I tried a hard reset holding down the power and home key together but that process had the same result. Is there anyway to get it back to factory????
I’m not sure what instructions you are refering too. The post you commented on is for an updated clockwork image, not anything that modifies your Nook Color. Here is how to return to stock. http://mrm3.net/nook-color-recover-any-bricked-device/
The link for the 1gb v3.2.0.1 CM is no longer working. Thanks.
Link is fixed. Thanks!
Can you please clarify after re-partion blue dot nook to either original or custom which version of Clockwork Recovery do i use. Also clarify before re-partion which version of clock work Recovery to use. I’m assuming i use Clockwork Recovery v3.2.0.1 for re-partion and then after re-partion I would use Clockwork Recovery v3.0.2.8 to install Cyanogenmod Nightlies. Thank You.
it really depends on the user and how much apps or videos/music you will have on the device. Go for custom. Use CWR 3.2.0.1
[...] version of the CWR, and the 4.6.16 version of the ManualNooter. Further instructions are here and [...]